Fiber Optic Center will be at OFC - Schedule your meeting with a member of the FOC team now
ÅngströmBond® AB9123 High Temperature Epoxy, Heat Cure (2.5g)
AB9123-2.5G
ÅngströmBond® AB9123, Heat Cure, 2-Part Epoxy, 2.5 Gram Packet.
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
The ÅngströmBond® 9123 Epoxy is a very fast-curing, high-temperature fiber optic connector epoxy designed for reliable connector termination. This low-viscosity epoxy produces a high-strength bond with glass, metal, ceramics, and most plastics. It utilizes widely used connector termination chemistries, making it an ideal choice for high-performance fiber optic applications. Available in a 2.5 gram packet.
Features of AB9123 Epoxy:
- High glass transition temperature allows it to pass the most stringent pistoning specifications.
- Excellent temperature cycling capabilities.
- Withstands high-humidity environments.
Physical Properties:
- Color
- Mixed: Staw/pale yellow
- Cured: Reddish/amber
- Specific Gravity: 1.12-1.20 g/cc
- Mixed Viscosity @ 25°C: 1,800-2,200 cPs
- Glass Transition Temperature, Tg: 95-120°C (203–248°F)
- Shore D Hardness: 80-88
- Mix Ratio by Weight, Resin to Hardener: 100/10
- Dielectric Strength: > 400
- Solids Content: 100%
- Lap Shear Strength: < 2900 psi
- Service Temperature Range: -60°C to 175°C (-76°F to 347°F)
Handling Characteristics:
- Working Life: 3-4 Hours
- Minimum Cure Schedule:
- @100°C (212°F) for 5 Minutes
- @120°C (248°F) for 2 Minutes
- @150°C (302°F) for 1 Minute
Datasheet
SDS
Mixing Instructions
Updates
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9123-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging. Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9123-2.5G. At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1. Burst pouch / Burst seal instead of dividing clip seal – The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip. Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix. In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy’s pot life. With the burst seal bi-pack, this is not a concern. Please note Burst Pouch Instructions: https://focenter.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
- Part Number
- Part A and Part B material
- Plastic outer packaging that contains the bi-pack material sleeve
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@focenter.com
Trade Shows
The ÅngströmBond® AB9123 High Temperature Epoxy, Heat Cure (2.5g) will be at the following trade show(s)*:
- OFC
- ECOC
- SPIE Photonics West
- ANGA COM
- IWCS Supplier Exhibition
- Fiber Connect
- BICSI Beyond
Fiber Optic Center
4.9 71 Google reviews
Represents overall Google Reviews of Fiber Optic Center, Inc.
Content Use Notice:
This product detail page and its content are the property of Fiber Optic Center, Inc. and are provided for informational and evaluation purposes.
You may view or reference this page for non-commercial use with proper attribution. Copying, rewriting, republishing, scraping, or using this content to produce new or modified content, including AI-generated content, is not permitted without written permission.
This content is protected by copyright law upon publication. Learn more